203 Crochet Pattern - Bullfinch with Hat and Scarf - Amigurumi soft toy PDF file by Ogol CP

Categories
Item Details
Comments
Reviews

Follow author 368

This listing is for an INSTANT DOWNLOAD PDF PATTERN not a finished project.

LANGUAGE: English

SKILL LEVEL: Experienced

FINISHED SIZE:
Approx. 25 cm/9.8 inches tall using the materials stated in the pattern.

SKILLS REQUIRED:
Knitting (Scarf and hat)
Crochet in rounds
Single crochet
Increasing
Decreasing
Slip stitch
Working with fluffy yarn
Tinting

MATERIALS AND TOOLS

Main yarn for the main parts – I used “Lotus Travka Stretch” by Kamteks (70% acrylic, 28% polyamide, 2% lycra) that has approximately 80 m in a 50 g skein): approximately 50 g of grey, 50 g of red, 25 g of black, 25 g of white.
Tip: You can use any moderately fluffy yarn (wool, acrylic, etc). The thicker the yarn, the bigger your toy will be. See the gauge section.
Additional yarn for the socks and boots – I used “Soufflé” by Moscow Yarn Company (100% acrylic, 292 m/100g) in red, white, beige and blue colors (you can choose any colors you like). See the gauge section to check if you chose the correct yarn weight.
Matching crochet hooks. I used 3 mm crochet hook for all yarns.
Strong thread of matching colors for needle sculpting.
Transparent glue.
Stuffing.
A pair of ready-made eyes – I used 16 mm half beads.
Black polymer clay and varnish to make the beak or a ready-made beak.
Brush or Velcro to brush up the toy.
Scissors.
Any material for tinting (optional) – oil pastels, oil paints, pencils, etc.
Transparent glue.
Single core copper PVC electrical wire – I used wire approximately 240 cm/94.5 inches long 2-2.5 mm in diameter.
Fabric tape approximately 1 cm wide to work up the wire ends (optional).
Brush or Velcro to brush up the toy.
A piece of white felt for the whites of the eyes.

For hat and scarf (optional)

Main yarn – any yarn. I used “Soufflé” by Moscow Yarn Company (100% acrylic, 292 m/100g) in white color for the hat (you can choose any colors you like). There are no strict measurements for the swatches for the accessories. Try the hat and the scarf on as you go to adjust the number of rows and the amount of sts.
Knitting needles – I used 4 mm for the hat and 2 mm for the scarf.

ABOUT THIS PATTERN
Pattern written using USA terminology

This pattern is easy to follow with step-by-step instructions (33 pages with detailed instructions, tips, photos illustrating the process)

This listing is for an INSTANT DOWNLOAD PDF PATTERN not a finished project.

LANGUAGE: English

SKILL LEVEL: Experienced

FINISHED SIZE:
Approx. 25 cm/9.8 inches tall using the materials stated in the pattern.

SKILLS REQUIRED:
Knitting (Scarf and hat)
Crochet in rounds
Single crochet
Increasing
Decreasing
Slip stitch
Working with fluffy yarn
Tinting

MATERIALS AND TOOLS

Main yarn for the main parts – I used “Lotus Travka Stretch” by Kamteks (70% acrylic, 28% polyamide, 2% lycra) that has approximately 80 m in a 50 g skein): approximately 50 g of grey, 50 g of red, 25 g of black, 25 g of white.
Tip: You can use any moderately fluffy yarn (wool, acrylic, etc). The thicker the yarn, the bigger your toy will be. See the gauge section.
Additional yarn for the socks and boots – I used “Soufflé” by Moscow Yarn Company (100% acrylic, 292 m/100g) in red, white, beige and blue colors (you can choose any colors you like). See the gauge section to check if you chose the correct yarn weight.
Matching crochet hooks. I used 3 mm crochet hook for all yarns.
Strong thread of matching colors for needle sculpting.
Transparent glue.
Stuffing.
A pair of ready-made eyes – I used 16 mm half beads.
Black polymer clay and varnish to make the beak or a ready-made beak.
Brush or Velcro to brush up the toy.
Scissors.
Any material for tinting (optional) – oil pastels, oil paints, pencils, etc.
Transparent glue.
Single core copper PVC electrical wire – I used wire approximately 240 cm/94.5 inches long 2-2.5 mm in diameter.
Fabric tape approximately 1 cm wide to work up the wire ends (optional).
Brush or Velcro to brush up the toy.
A piece of white felt for the whites of the eyes.

For hat and scarf (optional)

Main yarn – any yarn. I used “Soufflé” by Moscow Yarn Company (100% acrylic, 292 m/100g) in white color for the hat (you can choose any colors you like). There are no strict measurements for the swatches for the accessories. Try the hat and the scarf on as you go to adjust the number of rows and the amount of sts.
Knitting needles – I used 4 mm for the hat and 2 mm for the scarf.

ABOUT THIS PATTERN
Pattern written using USA terminology

This pattern is easy to follow with step-by-step instructions (33 pages with detailed instructions, tips, photos illustrating the process)

Purchase Crochet Pattern

SALE -50%

Download is immediately available after purchase.

Author: LittleOwlsHut

Language: English

Price: US $5.58* US $2.79*

With Prepaid-account: US $2.65*
All prices include VAT.

Buy from US $2.65

Add to Wishlist

This listing is for an INSTANT DOWNLOAD PDF PATTERN not a finished project.

LANGUAGE: English

SKILL LEVEL: Experienced

FINISHED SIZE:
Approx. 25 cm/9.8 inches tall using the materials stated in the pattern.

SKILLS REQUIRED:
Knitting (Scarf and hat)
Crochet in rounds
Single crochet
Increasing
Decreasing
Slip stitch
Working with fluffy yarn
Tinting

MATERIALS AND TOOLS

Main yarn for the main parts – I used “Lotus Travka Stretch” by Kamteks (70% acrylic, 28% polyamide, 2% lycra) that has approximately 80 m in a 50 g skein): approximately 50 g of grey, 50 g of red, 25 g of black, 25 g of white.
Tip: You can use any moderately fluffy yarn (wool, acrylic, etc). The thicker the yarn, the bigger your toy will be. See the gauge section.
Additional yarn for the socks and boots – I used “Soufflé” by Moscow Yarn Company (100% acrylic, 292 m/100g) in red, white, beige and blue colors (you can choose any colors you like). See the gauge section to check if you chose the correct yarn weight.
Matching crochet hooks. I used 3 mm crochet hook for all yarns.
Strong thread of matching colors for needle sculpting.
Transparent glue.
Stuffing.
A pair of ready-made eyes – I used 16 mm half beads.
Black polymer clay and varnish to make the beak or a ready-made beak.
Brush or Velcro to brush up the toy.
Scissors.
Any material for tinting (optional) – oil pastels, oil paints, pencils, etc.
Transparent glue.
Single core copper PVC electrical wire – I used wire approximately 240 cm/94.5 inches long 2-2.5 mm in diameter.
Fabric tape approximately 1 cm wide to work up the wire ends (optional).
Brush or Velcro to brush up the toy.
A piece of white felt for the whites of the eyes.

For hat and scarf (optional)

Main yarn – any yarn. I used “Soufflé” by Moscow Yarn Company (100% acrylic, 292 m/100g) in white color for the hat (you can choose any colors you like). There are no strict measurements for the swatches for the accessories. Try the hat and the scarf on as you go to adjust the number of rows and the amount of sts.
Knitting needles – I used 4 mm for the hat and 2 mm for the scarf.

ABOUT THIS PATTERN
Pattern written using USA terminology

This pattern is easy to follow with step-by-step instructions (33 pages with detailed instructions, tips, photos illustrating the process)

This listing is for an INSTANT DOWNLOAD PDF PATTERN not a finished project.

LANGUAGE: English

SKILL LEVEL: Experienced

FINISHED SIZE:
Approx. 25 cm/9.8 inches tall using the materials stated in the pattern.

SKILLS REQUIRED:
Knitting (Scarf and hat)
Crochet in rounds
Single crochet
Increasing
Decreasing
Slip stitch
Working with fluffy yarn
Tinting

MATERIALS AND TOOLS

Main yarn for the main parts – I used “Lotus Travka Stretch” by Kamteks (70% acrylic, 28% polyamide, 2% lycra) that has approximately 80 m in a 50 g skein): approximately 50 g of grey, 50 g of red, 25 g of black, 25 g of white.
Tip: You can use any moderately fluffy yarn (wool, acrylic, etc). The thicker the yarn, the bigger your toy will be. See the gauge section.
Additional yarn for the socks and boots – I used “Soufflé” by Moscow Yarn Company (100% acrylic, 292 m/100g) in red, white, beige and blue colors (you can choose any colors you like). See the gauge section to check if you chose the correct yarn weight.
Matching crochet hooks. I used 3 mm crochet hook for all yarns.
Strong thread of matching colors for needle sculpting.
Transparent glue.
Stuffing.
A pair of ready-made eyes – I used 16 mm half beads.
Black polymer clay and varnish to make the beak or a ready-made beak.
Brush or Velcro to brush up the toy.
Scissors.
Any material for tinting (optional) – oil pastels, oil paints, pencils, etc.
Transparent glue.
Single core copper PVC electrical wire – I used wire approximately 240 cm/94.5 inches long 2-2.5 mm in diameter.
Fabric tape approximately 1 cm wide to work up the wire ends (optional).
Brush or Velcro to brush up the toy.
A piece of white felt for the whites of the eyes.

For hat and scarf (optional)

Main yarn – any yarn. I used “Soufflé” by Moscow Yarn Company (100% acrylic, 292 m/100g) in white color for the hat (you can choose any colors you like). There are no strict measurements for the swatches for the accessories. Try the hat and the scarf on as you go to adjust the number of rows and the amount of sts.
Knitting needles – I used 4 mm for the hat and 2 mm for the scarf.

ABOUT THIS PATTERN
Pattern written using USA terminology

This pattern is easy to follow with step-by-step instructions (33 pages with detailed instructions, tips, photos illustrating the process)

Rating

0.0 260

0 Reviews

Sales

Comments

LittleOwlsHut

102 Reviews